Hanging Header Style
GROMMET
GROMMET
Grommet Size: Inside diameter of 1.6 inches, outside diameter of 2.3 inches.
Minimal Stack Back: Grommet panels have the smallest stack back among all heading styles, making them ideal for maximizing natural light.
Compatibility: Suitable for curtain rods or tracks with hooks for smooth operation.
Number of Grommets:
40 in wide → 6 grommets, 50 in wide → 8 grommets, 75 in wide → 12 grommets, 87 in wide → 14 grommets, 100 in wide → 16 grommets, 122 in wide → 20 grommets, 158 in wide → 26 grommets, 181 in wide → 30 grommets
Measurement Tip:
Measure from the top of the rod to the floor for the perfect fit.
Pleated
PINCH PLEAT
Pinch pleats are more gathered than other headings and have permanent sewn-in pleats for a more luxurious look. It is also called Double Pleated.
Panel width is the width that pleats already set. 200% fabric width is used for pleats.
It works for the track, traverse rod, channel rod, and pole with rings.
Comes with adjustable plastic pin hooks.
Pinch Pleat with Back Tab
A traditional pinch pleat design combined with a back tab for versatile hanging options. The back tab height is 8 cm, suitable for rods with a diameter of 1.5 inches or smaller.
Hanging Options: Can be hung on rings or directly on the rod using the back tab.
Measurement Note: Height may vary depending on the hanging method.
Included: Comes with adjustable plastic pin hooks.
Triple Pleat
Triple pleat curtains have three sewn-in pleats per fold, providing a more gathered and luxurious finish than pinch pleats.
- The fullness is 2.5 for a single panel measuring 50 inches or less
- The fullness is 2.3 to 2.5 for a single panel exceeding 50 inches.
Panel Width: Pleats are pre-set to the panel width.
Hanging Options: Compatible with tracks, traverse rods, channel rods, and poles with rings.
Included: Comes with adjustable plastic pin hooks.
Tailor Pleat
Tailor pleats offer a sophisticated, gathered look with pleats spaced approximately 5.5 to 6.5 inches apart. They use 200% fabric width for a rich, structured drape.
Pleat Count: 10 pleats for 50 in width, 14 for 72 in width, 30 for 150 in width.
Hanging Options: Works with tracks, traverse rods, channel rods, and poles with rings.
Included: Adjustable plastic pin hooks (metal hooks not included).
Measurement Note: Length is measured from the hook eyelet to the floor.
Goblet Pleat
Goblet pleat curtains feature deep, structured pleats resembling a wine glass shape, providing a formal and luxurious look. They use 200% fabric width for a full drape.
Pleat Spacing: Approximately 5.5 inches apart.
Hanging Options: Suitable for tracks, traverse rods, channel rods, and poles with rings.
Included: Metal pin hooks for easy installation.
Measurement Note: Length is measured from the hook eyelet to the floor.
Inverted Box Pleat
Inverted box pleat curtains are made by folding two equal sections of fabric toward the center, creating a tailored and symmetrical appearance. They use 200% fabric width for a balanced drape.
Pleat Spacing: 5 inches apart.
Hanging Options: Works with rods with rings and tracks.
Included: S-shaped metal pin hooks for secure hanging.
Measurement Note: Length is measured from the hook eyelet to the floor.
Pencil Pleat
Pencil pleat curtains are tightly gathered into thin, uniform folds, resembling a row of pencils. They use 220% fabric width for a soft and structured drape.
Hanging Options: Suitable for tracks or rods with rings.
Fabric Compatibility: Ideal for lightweight fabrics like linen
Soft Top
4-in-1
4-in-1 curtains offer versatile hanging options with a hook belt, rod pocket, back tab, and clip ring design. They provide flexibility for different installation methods.
Rod Pocket Size: 3 inches
Pleat Spacing: 6 pin hooks for every 40 inches of width.
Hanging Options: Works with rods with rings, rod pockets, or clip rings.
Measurement Note: Length is measured from the hook eyelet or top of the rod to the floor.
4-in-1 Back Construction(4-in-1's additional introduction)
The back construction allows four different hanging methods:
Hook Belt: Metal pin hooks (included)
Clip Ring: Works with clip rings (not included)
Rod Pocket: For a gathered, relaxed look
Back Tab: For a pleated, structured finish
Flat Hooks
Flat hook curtains offer a clean and minimalistic look with adjustable plastic pin hooks. They provide a neat and structured drape.
Pin Hook Size: 3 inches
Pleat Spacing: 6 hooks per 40 inches of width.
Hanging Options: Works with rods with rings.
Measurement Note: Length is measured from the hook eyelet to the floor.
Tab Top
Tab top curtains feature evenly spaced tabs (4 inches high) for a casual and relaxed look. They are easy to install and remove, making them ideal for both indoor and outdoor use.
Tab Count: 6 tabs for 40 inches of width.
Hanging Options: Suitable for rods.
Measurement Note: Length is measured from the top of the rod to the floor
Rod Pocket
Rod pocket curtains feature a 3-inch pocket that allows the rod to slide through for a relaxed, gathered look.
Hanging Options: Works with rods or rods with clip rings.
Measurement Note: Length is measured from the top of the rod to the floor.
Back Tab
Back tab curtains have hidden tabs at the back for a clean, tailored appearance.
Tab Height: 4 inches
Tab Count: 6 tabs for 40 inches of width, up to 15 tabs for 100 inches of width.
Hanging Options: Works with rods or rods with clip rings.
Ripple Fold
Ripple Fold with Belt Hook
Ripple fold curtains create smooth, continuous waves using a belt hook system. The hooks are attached to a belt sewn onto the curtain for consistent spacing.
Hook Spacing: Approximately 5 inches
Compatible Track Height: 2 inches
Included: Adjustable pin hooks
Ripple Fold with Tape Buckle
Ripple fold curtains with tape buckle use fabric tapes sewn into the top of the panel. The tapes are designed to fit into specific carriers on a track.
Tape Spacing: Approximately 5 inches
Compatible Track Height: 2 inches
Included: Endcaps for smooth movement across the track.
